LGR-3527-LRD - DISCONTINUED

Configurable top has 12U opening for 19 in. panels Open frame with multiple 2 in. holes on sides for cable runs between racks Open front (optional door) Two-pair fully adjustable rails tapped 10-32 (printed RU scale) Cable Management: multiple lacing points, holes, knockout panels Pilot Point screws with captive washers Grounding stud Threaded inserts (for optional leg levelers) Beveled corners Black textured powder coat finish Rack Space:  35U Height:  67.375 in. Width:  23.06 in. Depth:  27.00 in. (24.34 usable) Load Capacity: 3150 lbs. Spec Sheet:  2451 Spec (DISCONTINUED) CSI 3-part specification sheet:  LGR-3P CAD Drawings:  LGR-3527 Revit models:  LGR Series Install:  20055-FloorRack TAA Compliant EIA/TIA Compliant UL 2416 Listed Certified U.S. Steel Made in U.S.A. (BAA) The EIA/TIA/RoHS compliant, gangable rack shall be Lowell Model LGR-3527. Overall measurements shall be 67.375″H x 27″D x 23.06″W with panel space of 35 rack units. Load capacity shall be 3150 lbs. The rack shall include a top with 12U opening; open base with grounding stud; two pairs adjustable mounting rails with printed RU increments; knockout panels with combination knockouts above/below rear door; and provisions to mount an optional surface-mount front door (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black textured powder coat finish. It shall be listed to UL 2416. Thermal management Cable management Front door:  LFD-35 (solid) | LFD-35P (plexiglass) | LFD-35FV (full vent) Side panels:  SDP-3527 Rack rails:  RRD-35 (24U) Bases (27”D): LMB-27 (mobile) | LSB-27 (stationary) | LSSB-27 (shallow stationary) Rear door (full vent): LRD-35 (35U) Steel Vent Panels (can be used to close configurable top): SVSP (3U, 4U or 7U) Power Strips: Hardwired | Cord (Attached), | Cord (Detachable) 19” Power Panels: Hardwired | Cord (Attached) | Cord (Detachable)