LGR-4036-LRD - DISCONTINUED

Configurable top has 12U opening for 19 in. panels Open frame with multiple 2 in. holes on sides for cable runs between racks Open front (optional door) Two-pair fully adjustable rails tapped 10-32 (printed RU scale) Cable Management:  Multiple lacing points, holes, knockout panels Pilot Point screws with captive washers Grounding stud Threaded inserts (for optional leg levelers) Beveled corners Black textured powder coat finish Rack Space:  40U Height:  76.125 in. Width:  23.06 in. Depth:  36.00 in. (33.34 usable) Load Capacity: 3150 lbs. Spec Sheet:  2451 Spec (DISCONTINUED) CSI 3-part specification sheet:  LGR-3P CAD Drawings:  LGR-4036 Revit Models:  LGR Series Install:  20055-FloorRack TAA Compliant EIA/TIA Compliant UL 2416 Listed Certified U.S. Steel Made in U.S.A. (BAA) The EIA/TIA/RoHS compliant, gangable rack shall be Lowell Model LGR-4036. Overall measurements shall be 76.125″H x 36″D x 23.06″W with panel space of 40 rack units. Load capacity shall be 3150 lbs. The rack shall include a top with 12U opening; open base with grounding stud; two pairs adjustable mounting rails with printed RU increments; knockout panels with combination knockouts above/below rear door; and provisions to mount an optional surface-mount front door (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black textured powder coat finish. It shall be listed to UL 2416. Thermal management Cable management Front door:  LFD-40 (solid) | LFD-40P (plexiglass) | LFD-40FV (full vent) Side panels:  SDP-4036 Rack rails:  RRD-40 (40U) Base:  LMB-36 (mobile)  |  LSB-36 (stationary) Rear door:  LRD-40FV (full vent) Steel Vent Panels (can be used to close configurable top): SVSP (3U, 4U or 7U) Power Strips: Hardwired | Cord (Attached), | Cord (Detachable) 19” Power Panels: Hardwired | Cord (Attached) | Cord (Detachable)